PRODUCT
INFORMATION
PA-7010





PA-7010

ECONOMY DUCT SEALANT


PA-7010 is our economy grade sealant for air conditioning and heating ducts. It is exceptionally easy to brush and has a smooth creamy appearance. This a flammable solvent based product.
  1. SEALING SHEET METAL JOINTS AND SEAMS IN HIGH OR LOW PRESSURE DUCT SYSTEMS.
  2. MAKING AIR AND WATER TIGHT SEAMS IN ALL TYPES OF GALVANIZED, ALUMINUM OR STAINLESS STEEL SHEET METAL.
  3. SEALING SHEET METAL SCREW AND RIVET HEADS.
  4. ADHERING BUTTED FIBERGLASS DUCT LINER JOINTS TO PREVENT EDGE PICK UP BY HIGH VELOCITY AIR.
  5. SEALING AND SEAMING AIR PASSAGES IN DRYERS, AIR CONDITIONERS, AND INDUSTRIAL AIR PROCESSING UNITS.
  1. Forms an air-tight and water-tight seal.
  2. Flexes with expansion and contraction of the sheet metal.
  3. Bonds well to aluminum, galvanized steel or stainless steel.
  4. Can be applied quickly by caulking gun, putty knife, trowel or heavy brush.
  5. Grey color blends well with either aluminum or galvanized sheet metal.
  6. Adds structural strength to the flange or seam.
Composition A rubber compound which cures to a tough, flexible seal. It bonds very well to galvanized, stainless steel or aluminum sheet metal. Once cured it will not flow out of the sealed flange under pressure, but will flex with expansion and contraction.
Color Grey
Viscosity 100,000 cps ± 20,000 cps
Solvents Clean-up with aromatic solvents.
Volatile Organic Compounds (VOC) 385 grams/liter
Storability 6 months
Drying time Tack-free: 5 minutes
Complete drying: 1 to 3 days at room temperature
Service temperature -20F to 200F
Application and storage temperature 35F to 100F
Flammability Flammable when wet.
Slow burning when dry.
Application techniques Apply from a caulking tube or with a knife, trowel or heavy brush.
1/10 gallon caulking tubes (24 tubes/case)
1 quart caulking tubes (10 tubes/case)
1 gallon cans (4 cans/case)
5 gallon pails
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.

PRECISION ADHESIVES, INC.
51 Washington St., PO Box 910, Perth Amboy, NJ 08861
Phone: 800-456-3021
Fax: 732-442-9568

Click here to return to HVAC product list.