PRODUCT
INFORMATION
EZ-6010





EZ-6010

REDDISH-BROWN COLORED DUCT SEALANT


This is our premium grade, U.L. listed product for sealing joints in air conditioning and heating ducts. It can be applied from a caulking tube or with a knife or trowel. It is a flammable solvent based product. Our PA-2084 has identical properties, but has an aluminum color. Our EZ-4719 is a similar product but has a lower viscosity, making it more suited for brush application.
  1. SEALING SHEET METAL JOINTS AND SEAMS IN HIGH OR LOW PRESSURE DUCT SYSTEMS.
  2. MAKING AIR AND WATER TIGHT SEAMS IN ALL TYPES OF GALVANIZED, ALUMINUM OR STAINLESS STEEL SHEET METAL.
  3. SEALING SHEET METAL SCREW AND RIVET HEADS.
  4. ADHERING BUTTED FIBERGLASS DUCT LINER JOINTS TO PREVENT EDGE PICK UP BY HIGH VELOCITY AIR.
  5. SEALING AND SEAMING AIR PASSAGES IN VENTILATING SYSTEMS, DRYERS, FUME HOODS, AIR CONDITIONERS, AND INDUSTRIAL AIR PROCESSING UNITS.
  1. Forms an air-tight and water-tight seal which is tough and strong.
  2. Flexes with expansion and contraction of the sheet metal.
  3. Bonds well to aluminum, galvanized steel or stainless steel.
  4. Can be applied quickly by caulking gun, putty knife, trowel or heavy brush.
  5. Red color makes it easy to see where sealant has been applied.
  6. Adds structural strength to the flange or seam.
Composition An oil and water resistant synthetic rubber compound which dries to form a tough flexible seal. Forms a strong bond with duct surface. Once cured it will not flow out of the sealed flange under pressure.
Color Reddish-brown
Viscosity 100,000 to 140,000 cps
Solids Content Approximately 50%
Volatile Organic Compounds (VOC) 385 grams/liter
Solvents Clean-up with ketone solvents.
Storability 6 months
Drying time Tack-free: 10 to 15 minutes
Complete drying: 1 to 3 days at room temperature
Service temperature -20F to 250F
Application temperature 0F to 130F
Flammability Flammable when wet.
Slow burning when dry.
Application techniques Apply from a caulking tube or with a knife, trowel or heavy brush.
Coverage of one 1/10 gallon tube 1/8" bead - 130 to 150 lineal feet
1/4" bead - 33 to 37 lineal feet
1/10 gallon caulking tubes (24 tubes/case)
1 quart caulking tubes (10 tubes/case)
1 quart cans (12 cans/case)
1 gallon cans (4 cans/case)
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.


PRECISION ADHESIVES
131 Brown Street, Pittston, PA 18640
Phone: 800-456-3021
Fax: 570-654-0676

Click here to return to HVAC product list.