PRODUCT
INFORMATION
PA-39





PA-39

NON-FLAMMABLE WATER BASE INSULATION ADHESIVE


PA-39 is a non-flammable water base adhesive used for bonding fiberglass insulation to sheet metal. PA-39 viscosity and solids are optimized for spraying or dripping in a coil line machine. It may also be brushed or rolled on sheet metal. PA-39 has ZERO VOC.
  1. BONDING FIBERGLASS INSULATION TO SHEET METAL IN A COIL LINE MACHINE.
  2. BONDING FIBERGLASS INSULATION TO OTHER RIGID MATERIALS.
  1. Non-flammable, no unpleasant odors or hazardous fumes. Safe to use in enclosed areas.
  2. Easy clean up with warm water.
  3. Fast drying with a secure bond.
  4. Excellent coverage.
  5. Contains zero VOC (volatile organic compounds).
Composition A high solids, water base adhesive that is non-flammable when wet.
Color White, dries white.
Viscosity 2000 to 3000 cps
Solids Content 37% 2%
Solvents Thin with water. Clean up when wet with warm water. Dry clean up with aromatic or chlorinated solvents.
Storability Keep from freezing. Store and ship at temperatures above 32F. Use within 6 months after receipt.
Weight per Gallon 10.0 0.1 #/gallon
Service Temperature 0F to 180F
Flammability Wet - Non-flammable. Dry - Slow burning.
Application and Storage 50F to 100F
Application techniques spray or drip in coil line machine. Tack insulation in place until dry.
1 gallon cans
5 gallon pails
55 gallon drums
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.
PRECISION ADHESIVES
131 Brown Street, Pittston, PA 18640
Phone: 800-456-3021
Fax: 570-654-0676

Click here to return to HVAC product list.