PRODUCT
INFORMATION
PA-330





PA-330

SPRAYABLE DUCT INSULATION ADHESIVE


PA-330 IS A IS A HIGH PERFORMANCE, QUICK TACK, EASY TO SPRAY ADHESIVE USED TO BOND FIBERGLASS INSULATION TO SHEET METAL DUCTS. IT IS SPECIFICALLY DESIGNED FOR SPRAY APPLICATION, BUT CAN ALSO BE BRUSHED OR ROLLED. THIS IS A FLAMMABLE SOLVENT BASED PRODUCT AVAILABLE IN RED OR BLACK ON REQUEST.
  1. BONDING FIBERGLASS INSULATION TO THE INTERIOR OF SHEET METAL DUCTS.
  2. BONDING FIBERGLASS INSULATION TO BACKING OR FACING MATERIAL SUCH AS ALUMINUM FOIL, VINYL OR PAPER.
  3. BONDS TO A WIDE VARIETY OF SURFACES.
  4. BONDING FIBERGLASS INSULATION TO OTHER RIGID STRUCTURES SUCH AS THE INTERIOR OF TRUCKS, RAILROAD CARS AND AIR FRAMES.
  1. Easy spraying in simple equipment at low pressure.
  2. Extremely fast drying and quick development of strong tack, but plenty of open time to shift position of fiberglass if necessary.
  3. Adhesive remains tacky even after completely dry.
  4. Good coverage results from smooth spray pattern.
  5. Sets up quickly when sprayed on vertical surfaces and does not sag, drip, or run.
  6. Permanent bond which gets harder as adhesive ages.
Composition PA-330 is a high solids adhesive which looks thick as it comes from the container but sprays easily without dilution and gives a good spray pattern at low pressures. It is extremely fast drying and very tacky. Bonds well to aluminum, galvanized or stainless. Especially suited to high production shops where the work must move out fast.
Color Red (also available in black in full drum quantities)
Viscosity Sprayable, 2000 to 3000 cps
Solids Content 33% 2%
Solvents Clean-up with mineral spirits, turpentine, or aromatic solvents.
Storability 6 months
Time to tack 30 seconds
Open time 5 minutes
Service Temperature 0F to 180F
Flammability Flammable when wet.
Application and Storage 40F to 100F
Application techniques Specifically designed for spray application, but can also be brushed or rolled
1 gallon cans
5 gallon pails
55 gallon drums
NOT RECOMMENDED FOR OUTDOOR USE

Because we have no control over the manner in which this product may be used, we cannot guarantee the end results to be obtained in our customers' processes. Precision Adhesives shall not be liable for any loss, damage, or injury, whether ordinary, direct, incidental, or consequential, arising from the purchase, possession, handling, use, or inability to use this material.


PRECISION ADHESIVES
131 Brown Street, Pittston, PA 18640
Phone: 800-456-3021
Fax: 570-654-0676

Click here to return to HVAC product list.